SKD G18 Glock Gel Blaster Review

2021-10-14

Foreword:

The Skd G18  is a recommended gel ball blaster toy gun. I originally wanted to say that this is a highly recommended pistol gelsoft. However, the quality of the factory is not strictly controlled, and the product itself has many problems, but the price is really cheap. The last time the reviewer had Two feedbacks (one gearbox has screws, one mag prime button is always open and always pre-feeds).

But aside from these unstable factors, the appearance of this glock is very good, and it can be made into an automatic water orbeez gun in a model like Glock 18. It can be seen that the manufacturer has spent a lot of effort on the design. Innovation is worth learning from all the manufacturers who want to produce pistol gel blasters.

Introduction of Gelblaster:

Product features:

one-click switch between priming / single-shot / burst,

lower ammo supply magazine,

electric powered,

built-in battery,

blowback slide

Performance:

Fire power: 150FPS

Rate of fire: 6RPS

Shooting range: 15-20m

Speed measurement: Using the original 7.4V battery, the gel ball trajectory is stable, and the accuracy of shooting at close range is relatively good. It is the pistol gearbox that limits the initial velocity, and the range is medium.

Product evaluation:

Appearance score: ★★★★★★★★ (8)

Material score: ★★★★★★★★ (8)

Rate of fire score: ★★★★★★ (6)

Range score: ★★★★★ (5)

Accuracy score: ★★★★★★ (6)

Feeding score: ★★★★★★ (6)

Wargame performance: ★★★★★★★ (7)

Modification capability score: ★★★★ (4)

Comprehensive recommendation: ★★★★★★ ( very recommended)

Unboxing the package:

▲ including: glock gel blaster main body, magazine, safety glasses, gel balls, storage bottle, charging usb, etc.

▲Please check the water bomb manual carefully before use.

Appearance

▲Gun body size: 20.5*14.5cm; feeding: lower feeding magazine (button pre-feeding); battery: built-in 7.4v lipo battery (removable).

▲The magazine is powered by electric, and the bullet outlet is equipped with a bullet-blocking design. The bullet will not be messed up when pulling out the magazine. There is also such a setting on the gun body, which is a very practical design.

▲The magazine can hold about 50 ammunition, and the actual ammo that can be shot is about 40pcs. The first pre-supply will be a little less.

▲The bottom is the OFF/ON switch and charging port.

▲Multi-function button, long press to realize pre-feeding, double press to switch single shot/continuous shot.

▲The upper part is integrated, and the overall texture is improved a lot.

Dismantling guide:

▲To disassemble the gun body, you need to push out a metal pin, the air cylinder, push head, barrel, firing spring and return spring inside the upper main shell.

▲The lower part is the gearbox, control chip, and battery.

▲The gearbox gear is relatively strong and should be more durable.

▲The welding of the metal inner tube and the control chip is a bit low, and the connection line is relatively thin. Some friends may burn it as soon as it is used. The original battery is 7.4V, 450mha, and it can hit more than 10 magazines when fully charged, which is usually enough as a secondary weapon.

Final summary:

[SKD G18] Hydrogel blaster should surpass all previous pistol gel ball blasters in terms of product design. It's a pity that such a good design is affected by the quality control of the factory. According to my statistics, about 10% of this model has some problems. It is really a pity. But zhenduo can ship this gel blaster to USA from China. And we have its EU stock. If you met any issues, we can resend a new one or refund you, so no worries.

At the same time, I hope that manufacturers can solve these problems in time. Problems, ensure product quality, and properly solve the product quality that is already in the hands of players. As far as I got it, it is worth having as a secondary weapon for wargame and cqb.