SpecterDR 1.5-6x 7.62 with RMR
Elcan Specter DR Gen3 1.5-6x Nato 7.62 (CX5456 ballistic reticle) w/ integral A.R.M.S. Picatinny mount and RMR
The ELCAN SpecterDR 1.5x/6x is the second evolution in the family of Dual Role Optical Sights. Based upon the battle-proven SpecterDR design, the SpecterDR 1.5x/6x provides higher magnification to enable greater precision and longer engagement ranges, while at the same time providing an exceptional field of view in CQB mode.
With crystal-clear optics and a generous eye relief, making it the ideal instrument for designated marksman rifles and other long-range applications. As with all SpecterDR sights, the magnification and field of view can be changed instantly with the throw of a lever.
Depending upon the situation, the user may adjust the sight to illuminate the crosshair or just a brilliant red dot in the center. Because the reticles are etched in glass, they are plainly visible even in the case of loss of electrical power due to battery failure or EMP.
1. Set the magnification to 6X when zeroing!
2. Azimuth zeroing uses the windage screw found at the front of the mount. Rotate the front left windage screw clockwise to move the point of impact to the left; counterclockwise to move to the right. Each click of the windage screw moves the point of impact by one-half MOA (approximately 1/2” at 100 yards).
3. Elevation zeroing uses the elevation dial the bottom rear of the mount. Unlock the zeroing lock (silver tab) by raising it up as far as it will go. Be sure that the lock pin at the bottom of the zeroing lock is fully disengaged from the elevation dial.
4. Adjust the elevation dial as required. Each click of the elevation dial moves the point of impact by one-half MOA (approximately 1/2” at 100 yards). Turn the dial to the Right to Raise the point of impact, turn to the Left to Lower the point of impact.
When satisfied with elevation zero, lower the zeroing lock (silver tab) fully to lock the elevation zero at its current setting.
|Magnification||6x / 1.5x|
|Reticle||Dual-thickness ballistic crosshair with user-selectable red dot and VSOR rangefinder|
|Aiming Dot diameter||1.5 MoA @ 6x, 6 MoA @ 1.5x|
|DFOV156-C2:||CX5456 reticle: 100-1000m for 7.62 NATO|
|CQB offset||<44mm @ 60m|
|Field of View||16 deg @ 1.5x, 4 deg @ 6x|
|FoV @ 6x||7 m @ 100 m (21 ft @ 100 yds)|
|FoV @ 1.5x||28.7 m @ 100 m (86 ft @ 100 yds)|
|Illumination source||Battery-powered LED|
|Crosshair illumination||5 settings, AN/PVS-22 night vision compatible|
|Red Dot illumination||5 settings, AN/PVS-22 night vision compatible|
|Eye Relief||70 mm|
|Nominal focus||300m @ 6x, 105m @ 1.5x|
|Fixed focus range||20m to infinity|
|Battery type||CR2032 (3v Lithium)|
|Battery life||600 hours minimum, 3000 hours average|
|Exterior finish||Hard-anodized aluminum, gray/black color|
|Adjustment resolution||0.5 minute of angle|
|Adjustment range||120 minutes of angle|
|Base requirement||Mil-Std-1913 ?Picatinny Rail? (Weaver compatible)|
|Available accessorys||ARD (Anti-Reflection Device) Flip Covers|