Free Postage for all orders!  15% OFF for 3 more items in cart coupon code: ZD15

My Cart0
Write a Review
Rating
(3)
(0)
(0)
(0)
(0)
ZWQ S200 Metal Upgrade Parts
ZWQ S200 Metal Upgrade Parts

6512290

AUD$ 21.76
Reviews (3)
  • 2022-01-17
    t****i
    -1.6 Spring Follow up review-
    I believe the stock spring is the 1.6 - after a month of playing I've lost 10fps - and the pistol is shooting 89-99fps again. Which is basically what stock pistol was shooting. Skip this and go for the 1.8 spring instead.


    -Slide Release-
    I find these give more grip than the stock slide releases. But your fingers don't sit as deep in on the slide when you prime.
    NOTE: They are a real PITA to install. You need to hold the spring in place while you line up the pin - then push the retaining pin back through the spring and alloy part. Do you need em?....mmmm....Personal preferance IMO.


    -1.8 Spring-
    After installing the 1.8 spring, the prime is noticably harder. FPS = 122-126. I'll see if the spring breaks-in after a month of use. Hopefully it will stay in the 120fps range. No internal alloy upgrades required....yet!. If you like to MOD - then you want this upgrade now. Its cheap and easy to install.


    -Brass Barrel (stock length 134mm)-
    The stock aluminium barrel was loose - used Gen 3 darts would drop right through. The Brass barrel has a tighter fit so they they don't fall out if you carry the pistol primed. If you are using NEW darts every time - you will probably be okay with the stock aluminium barrel. But I use darts at lease 2-3 time before they break. The used darts seemed snug in the brass barrel. I wish it was slightly tighter still. Another cheap but decent upgrade.
    NOTE:the Pistol is slightly front heavy with the brass barrel installed. But it looks so cool!

    NERF OUT!
  • 2021-12-23
    t****i
    -PARTS-
    I bought the 1.6 spring, 1.8 spring and the slide release levels. Postage was 17 days to Canberra, AUSTRALIA.
    The 1.6 spring feels/looks very similar to the stock spring? You don't really need the bigger slide release paddle things. But I feel they are easier to press when priming.

    -WARNING-
    Pulling the blaster apart is EASY. Use a 2mm and 3+mm punch. Reassembling the blaster together was the challenge.
    You will need some patience, and long pliers or tweezers. There are 2 really small springs that pop out, and you have to hold the blaster a certain way to put them back in. If you loose the springs, your trigger and slide release won't work 'very well'. There might have been a 2nd spring for the trigger - but I couldn't find it. We'll see when the next blaster arrives for modding.

    -TESTING-
    Not a huge difference really. I was gettting 102-110fps after inserting the upgraded spring and some lube on the plunger (see pictures).
    After testing 50+ darts - I don't believe you will not need to upgrade any of the other internals. The plastic is fine.

    I will run the 1.6 spring for a few houndred rounds before I try the 1.8 upgraded spring. The 1.8 spring is definatly stiffer than stock. I feel it might snap some internals. After pulling the blaster apart. Some of the plastic inside is quite flimsy. Just a heads up.

    NERF OUT!
  • 2021-12-03
    B****r
    All nice metal upgrade kit arrive today. checked their disassembly vid of the s200 blaster, it's easy. very worth buy, i am looking forward to their next product